2
TABLE OF CONTENTS
Safety Instructions……………………………………………………………….. 3
Description of Accessories Included……………………………………… 4
Machine and Paper Setup…………………………………………………….. 4
Description of Parts………………………………………………………………. 7
Control Panel Operations………………………………………………………. 8
To Select Cutting Mode for 3.5” x 2” 10-up Preset…………….. 8
To Select Other Cutting Modes…………………………………………. 9
To Set Pieces To Be Cut……………………………………………………... 9
Datum Selection ……………………………………………………………….. 10
Selecting the Language……………………………………………………… 10
Adjusting For Error In Card Size…………………………………………. 11
Sub-accumulated Counting Reset ……………………………………… 12
Check the Total Accumulated Cards…………………………………… 12
Adjust the Name Card Size………………………………………………… 12
Select the Cutting Column…………………………………………………. 12
Factory Setting Loaded………………………………………………………. 13
Self Sharpening Method…………………………………………………….. 13
Customize Mode Operation Method…………………………………… 13
Unloading the Rotary Blade Assembly………………………………………… 14
Loading the Rotary Blade Assembly……………………………………………. 14
Adjusting to Cut Different Thickness Paper…………………………………. 14
Troubleshooting……………………………………………………………………....... 15
Warranty………………………………………………………………………………....... 17
To Next Page
Loading...
