Status Messages – Poll / Response
Message type 0x02 – Fault Status Poll
Header (29 bits) 2 22 11 00 0
8.....43......65......87......0
1100011101111 [ A ] [ B ]
3 bits, Priority 6 (110)
2 bits, 00
8 bits, 0xEF
[A] = 8 bits, Target (AB node address)
[B] = 8 bits, Source (Integrator node address)
Data length – 1 byte
Data byte 0
bit 7......0
00000010
8 bits, Message type 0x02
Example – 18EF8005 [1] 02
This message requests fault status from the AB unit at CAN node address ‘0x80’ to be sent to the Integrator unit at CAN node
address ‘0x05’.
Message type 0x03 – Firmware Version Poll
Header (29 bits) 2 22 11 00 0
8..... 43...... 65......87...... 0
1100011101111 [ A ] [ B ]
3 bits, Priority 6 (110)
2 bits, 00
8 bits, 0xEF
[A] = 8 bits, Target (AB node address)
[B] = 8 bits, Source (Integrator node address)
Data length – 1 byte
Data byte 0
bit 7......0
00000011
8 bits, Message type 0x03
Example – 18EF8005 [1] 03
This message requests firmware version information from the AB unit at CAN node address ‘0x80’ to be sent to the Integrator unit at
CAN node address ‘0x05’.
35
To Next Page
Loading...