● SMTP User Name: enter the SMTP user name, which is usually the same as
the sender’s email address.
● SMTP Password: configure the password of SMTP service, which is the
same as the sender’s email address.
● Email Subject: enter the subject of the email.
● Email Content: compile the contents of emails according to your need.
● Email Test: click Email Test to test if you can receive the Email.
16.4.2.FTP Notification Setting
If you want to receive the security notification via FTP, you can configure the FTP
notification on the web Intercom > Action > FTP Notification properly.
Parameter Set-up:
● FTP Server: enter the address (URL) of the FTP server for the FTP
notification.
● FTP User Name: enter the FTP server user name.
● FTP Password: enter the FTP server password.
● FTP Test: run the test to see if FTP notification can be sent and received by
the FTP server.
To Next Page
Loading...
Need help?
General
