Technical Support: 01905 560 219 9Order: 01905 823 299 | orders.akw-ltd.co.uk
9
SAFETY & ELECTRICAL INFORMATION
Safety & Electrical Information
The 230V AC power supply to this unit must be provided via a two-pole isolator switch and a dedicated
circuit with a 30mA RCD device installed in accordance with the latest revision of the Wiring Regulations
BS7671. It must be wired into a fused, un-switched, xed wiring connector tted with a 5 amp fuse.
READ INSTRUCTIONS
BEFORE INSTALLING
THIS PRODUCT
READ INSTRUCTIONS
BEFORE INSTALLING
THIS PRODUCT
READ INSTRUCTIONS
BEFORE INSTALLING
THIS PRODUCT
CAUTION: 230V AC
Lethal Voltage present on the AC supply
Ensure mains power supply is switched OFF before starting wiring
DO NOT take risks with plumbing or electrical installation. This product must be installed and
serviced by a competent person in accordance with the current edition of the Wiring Regulations
(BS7671), local by-laws and the current building regulations.
This product must be installed, used and maintained in good working order in accordance with
these instructions and recommendations.
If the supply cord is damaged, it MUST be replaced in order to avoid hazard.
Safety Information
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
Electrical Information
THIS CLASS II APPLIANCE DOES NOT REQUIRE AN EARTH
To Next Page
Loading...