What does 'R-Bumper deflected L-Bumper deflected' mean on AL-KO Lawn Mower?
If your AL-KO Lawn Mower displays 'CN119: R-Bumper deflected CN120: L-Bumper deflected', it means the appliance has moved onto an obstacle and cannot free itself. Remove the obstacle.
What does 'Cal: Collision' mean on my AL-KO Lawn Mower?
If your AL-KO Lawn Mower displays 'CN018: Cal: Collision', it indicates that the appliance has bumped into an obstacle. Remove the obstacle.
What to do if my AL-KO Lawn Mower displays 'Battery over heating'?
If your AL-KO Lawn Mower displays 'CN104: Battery over heating', the rechargeable battery has overheated (more than 60 °C), and discharging is not possible. Switch off the appliance and let the rechargeable battery cool down. Do not place the appliance on the base station.
What does 'Blocked WR' mean on my AL-KO Lawn Mower?
If your AL-KO Lawn Mower displays 'CN130: Blocked WR', it means the right wheel motor is blocked. Remove the blockage.
General| Brand | AL-KO |
|---|---|
| Model | SOLO Robolinho 700 |
| Category | Lawn Mower |
| Language | English |
Explains the mowing process, charging cycles, and blade rotation.
Highlights the importance of safety devices and their maintenance.
Explains the PIN/PUK system for appliance security and operation.
Details the various safety sensors (lifting, bump, tilt) and their functions.
Provides general safety guidelines for operating the appliance.
Lists recommended clothing and protective gear for safe operation.
Advises on ensuring safety for bystanders and pets during operation.
Covers safe use of the appliance itself, including pre-operation checks.
Safety precautions related to electrical components and water.
Guidance on planning the layout of mowing areas and base station location.
Step-by-step instructions for mounting the base station securely.
Procedure for installing the boundary cable around the mowing area.
Procedure for connecting the boundary cable to the base station.
Guidelines for laying out the boundary cable around the mowing area.
Steps to connect the base station to the mains power supply.
Procedure for calibrating the appliance to the mowing area.
Step-by-step guide for replacing worn or damaged cutting blades.
Troubleshooting guide for common appliance malfunctions.
Details specific fault codes and their corresponding remedies.
Details specific fault codes and their corresponding remedies.
To Next Page