To Next PageTo Next Page
Need help?Do you have a question about the Alarm Lock Trilogy ETDL and is the answer not in the manual?
General| Power Supply | Battery |
|---|---|
| Material | Metal |
| Wireless | No |
| Strike Plate | Included |
| Weather Resistance | Yes |
| Key Override | Yes |
| Audit Trail | Yes |
| Model | Trilogy ETDL |
| Backset | 2-3/4" |
Details the procedure for powering up the lock for the first time and upon re-application of power.
Explains how to reset the lock to factory default settings by erasing all programming.
Provides instructions and cautions for replacing the lock's batteries.
Guides the user through the initial setup and preparation of the lock.
Details entering Program Mode and changing the factory Master Code.
Explains setting time, date, weekday, and managing user codes.
Guides on testing and verifying the functionality of programmed user codes.
Details how to set a new 6-digit Master Code for the lock.
Explains the process for managing user codes, including adding, deleting, or changing them.
Explains functions to clear schedules and timeout settings.
Covers transferring data between the lock and a PC using DL-Windows software.
Details setting schedules for enabling/disabling Passage Mode.
Activates Passage Mode if a Group 1 user code is entered within a defined window.
Activates a relay if a Group 1 user code is entered within a defined window.
Sets the start time for the window when Group 1 activation triggers the relay.
Sets the end time for the window when Group 1 activation triggers the relay.
Explains how Group 1 activation enables Group 4 users within a specified time window.
Sets the start time for the window when Group 1 activation enables Group 4.
Sets the end time for the window when Group 1 activation enables Group 4.
Provides instructions for resetting the lock to factory default settings.
Explains features activated by Group 1 user codes during specified time windows.
