EasyManua.ls Logo

Albrecht DR 490 - Page 49

Albrecht DR 490
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49English
English
Error Remedy
No network connection can be
established.
1. Check the WIFI function.
2. Try to set an IP address at the device.
3. Activate the DHCP function on the router and make
the connection again at the device.
4. A rewall is activated on the network set the
respective program in such a way that access is
possible.
5. Reboot the unit to try.
WIFI connection cannot be
established.
1. Check the availability of WIFInetwork on the access
point.
2. Place the device closer to the router.
3. Make sure the WEP/WPA password is correct.
No station is found. 1. Check the network as well as the access point and
rewall.
2. The station may not be available currently, try it again
later or select another station.
3. The link of the station is changed or the station no
longer transmits – ask the provider for information.
4. The link of manual added station is not correct, make
sure it is correct and re-enter.
Hiss in DAB/FM mode. 1. Check/move the DAB/FM antenna.
2. Move the radio to a different location.
3. Please check if the radio is close to other electrical
sources and therefore under inuence of interferences
Alarm does not work. 1. Switch on the alarm.
2. Due to the volume setting, refer to the solutions of “No
sound”.
3. The source of alarm was set to be station but there is
no network connection. Change the source of alarm or
recongure the connection.
Unable to do DLNA streaming. 1. Check the connection of the network. DR 490 and
your device need to be in the same network; and test
if the network in good condition.
2. Make sure the settings on your device are correct.
System freezes suddenly. 1. The radio is overloaded, reboot the unit.
2. The normal function of the product may be disturbed
by strong Electro-Magnetic Interference. If so, simply
reset the product to resume normal operation by
following the instruction manual. In case the function
could not resume, please use the product in other
location.

Table of Contents

Related product manuals