EasyManua.ls Logo

Albrecht DR 790 CD - Backlight; 10 Troubleshooting

Albrecht DR 790 CD
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
English
EN
9.5. Backlight
You can dim or switch off the backlight by pressing the button. Three brightness levels and off
are available.
10. Troubleshooting
No power
Ensure that the mains cable is connected securely.
Ensure that the unit is switched on.
The remote control does not function
Use the remote control near to the unit.
Point the remote control at the remote control sensor on the unit.
Replace the batteries in the remote control with new ones.
Remove any obstacles between the remote control and the unit.
Loud hum or noise is heard
The plugs and sockets are dirty. Wipe them with a cloth slightly moistened with an appropriate
non-abrasive cleaning solution.
The unit may freeze up during use. Switch off and then switch on the unit again at the mains
socket to reset it.
No sound output
Make sure that the unit is not muted.
Press the V+ button or turn the Volume knob to increase the volume.
I can’t nd the Bluetooth name of this unit on my Bluetooth device for pairing
Ensure that the unit is switched on.
Ensure that the Bluetooth function is activated on your Bluetooth device.
The unit has a Bluetooth function that can receive a signal within 10 meters.
In order to avoid interferences, de-activate Wi-Fi on your device (Smartphone, tablet, etc...)
when playing music using Bluetooth.
Disc in place but the unit won’t play
Ensure that the disc label is facing up.
Ensure that the disc is clean.
PAUSE mode may be activated, deactivate it.
Disc may be damaged or dirty; check and clean the disc.
Please check that your CD is recorded in the right format (see chapter „5. CD Mode“ auf Seite
28)
Disc skips
Ensure the unit is on a secure spot. Vibrations or jarring can cause the disc to skip.
Please make sure that there are no scratches on the CD
FM reception
Ensure the FM antenna is fully extended.
Electrical interference in your home can cause poor reception. Move the unit away from them
(especially those with motors and transformers).
The unit switches off automatically during playing
Increase the volume level on your input source player like MP3-player.
Interferences in Speakers
Check that you have not left a mobile phone near the unit.

Table of Contents

Related product manuals