Alcatel-Lucent 7450 ESS-12 - Coordinates

System Management
7450 ESS OS Basic System Configuration Guide Page 255
Coordinates
Use the optional coordinates command to specify the GPS location of the device. If the string
contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double
quotes.
Use the following CLI syntax to configure the location:
CLI Syntax: config>system
coordinates coordinates
Example
: config>system# coordinates "N 45 58 23, W 34 56 12"
The following example displays the configuration output of the general system commands:
output sysName@domain>config>system# info
#------------------------------------------
echo "System Configuration "
#------------------------------------------
name "ALA-12"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
. . .
exit
----------------------------------------------
A:ALA-12>config>system#