Alcatel-Lucent 7210 SAS M User Manual

Alcatel-Lucent
Service Access Switch | Release 8.0 Rev. 01
7210 SAS M, T, X, R6, Mxp OS
MPLS Guide
3HE10394AAAATQZZA
3HE10394AAAATQZZA
Alcatel-Lucent – Proprietary & Confidential
Contains proprietary/trade secret information which is the property of Alcatel-Lucent. Not to be made available
to, or copied or used by anyone who is not an employee of Alcatel-Lucent except when there is a valid nondisclosure
agreement in place which covers such information and contains appropriate non-disclosure and
limited use obligations.
Copyright 2015 © Alcatel-Lucent. All rights reserved.All specifications, procedures, and information in this document are subject to change and revision at any time
without notice. The information contained herein is believed to be accurate as of the date of publication. AlcatelLucent

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English

Summary

MPLS and RSVP

MPLS Fast Re-Route (FRR)

Details MPLS Fast Re-Route functionality for bypassing failures, including behavior of LSPs and manual bypass tunnels.

RSVP Traffic Engineering Extensions for MPLS

Describes extensions to RSVP for automatic signaling of LSPs, improving scalability and reliability.

Shared Risk Link Groups

MPLS Transport Profile (MPLS-TP)

Detailed Descriptions of MPLS-TP

Provides in-depth descriptions of MPLS-TP LSPs and pseudowires.

MPLS-TP Operations, Administration and Maintenance (OAM)

Details MPLS-TP OAM mechanisms like LSP-Ping for connectivity verification and proactive CC/CV.

Proactive CC, CV and RDI

Pseudowire Redundancy and Active / Standby Dual Homing

MPLS-TP LSP Protection

Describes linear 1-for-1 protection of MPLS-TP LSPs, as defined in RFC 6378.

LDP Configuration Commands

Peer Parameters Commands

Details how to configure specific parameters for an LDP peer, including authentication and TTL security.

LDP Command Reference

Outlines the hierarchical structure of LDP commands, including configuration, show, clear, and debug commands.