Alcatel-Lucent 7210 SAS M - Configuration Notes

MPLS and RSVP
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide Page 77
Configuration Notes
This section describes MPLS and RSVP caveats.
• Interfaces must already be configured in the config>router>interface context
before they can be specified in MPLS and RSVP.
• A router interface must be specified in the config>router>mpls context in order to
apply it or modify parameters in the config>router>rsvp context.
• A system interface must be configured and specified in the config>router>mpls
context.
• Paths must be created before they can be applied to an LSP.