Alcatel-Lucent 7210 SAS M - Interface Parameters

Common Configuration Tasks
Page 262 7210 SAS M, T, X, R6, Mxp MPLS Configura-
tion Guide
Interface Parameters
Use the following syntax to configure interface parameters:
CLI Syntax: config>router# ldp
interface-parameters
hello timeout factor
keepalive timeout factor
transport-address {system|interface}
interface ip-int-name
hello timeout factor
keepalive timeout factor
transport-address {system|interface}
no shutdown
The following example displays an interface parameter configuration example:
A:ALU_SIM11>config>router>ldp# info
----------------------------------------------
aggregate-prefix-match
prefix-exclude "sample"
exit
graceful-restart
exit
peer-parameters
peer 1.1.1.1
ttl-security 1
exit
exit
interface-parameters
interface "a"
exit
exit
targeted-session
exit
----------------------------------------------