Alcatel-Lucent 7210 SAS M - Deleting an MPLS Interface

MPLS Configuration Management Tasks
Page 98 7210 SAS M, T, X, R6, Mxp MPLS Configura-
tion Guide
Deleting an MPLS Interface
In order to delete an interface from the MPLS configuration, the interface must be shut down
first.
Use the following CLI syntax to delete an interface from the MPLS configuration:
CLI Syntax: mpls
[no] interface ip-int-name
shutdown
A:ALA-1>config>router>mpls# info
----------------------------------------------
...
admin-group "green" 15
admin-group "red" 25
admin-group "yellow" 20
interface "system"
exit
no shutdown
----------------------------------------------
A:ALA-1>config>router>mpls#