To Next PageTo Next Page
Need help?Do you have a question about the Alcatel-Lucent 7210 SAS Series and is the answer not in the manual?
General| Product Series | 7210 SAS |
|---|---|
| Category | Switch |
| Type | Service Access Switch |
| Power Supply | AC and DC power supply options available, often with redundancy. |
| Dimensions | Varied (depends on model) |
| Weight | Varies by model. |
| Ports | Various configurations available, including 10/100/1000Base-T, 100/1000Base-X SFP, 10G SFP+, and others depending on the specific model within the series. |
Describes the guide's content, organization, and CLI command usage for 7210 SAS QoS.
Provides contact details for technical assistance and support resources for Alcatel-Lucent devices.
Details the tasks and logical flow for configuring QoS policies on 7210 SAS devices.
Introduces QoS mechanisms on 7210 SAS devices, capabilities, and policy types.
Defines egress QoS marking and ingress QoS interpretation for traffic on access-uplink ports.
Defines network forwarding class queue characteristics applied on egress access uplink ports.
Defines ingress service forwarding class queues or meters and maps traffic flows to forwarding class.
Defines queue and marking characteristics for traffic egressing towards the customer on access ports.
Configures service egress QoS policies, defining queue parameters and remark policy for 7210 SAS-K.
Provides information on scheduler support and modes, including Strict Priority and WFQ on 7210 SAS-K.
Configures port scheduler policies for egress ports, controlling traffic behavior on a per-port basis.
Explains how to configure slope QoS policies for service ingress/egress and access uplink queues.
Provides information on configuring remark policies for 7210 SAS-K devices using CLI.
Explains how QoS policies account for Ethernet frame overhead, including IFG and preamble.
Details the steps to enable frame-based accounting for ingress metering and egress queues.
Describes DEI-based classification on access ports, determining ingress profile for packets.
Describes DEI-based marking for SAP egress and access-uplink port egress on 7210 SAS-K.
Allows limiting traffic egressing through a port to a value less than available link bandwidth.
Explains how to apply port level rate-limiting using the egress-rate command.
Provides command hierarchies and syntax for configuring and managing egress rate limits.
Details CLI commands for configuring SAP ingress QoS policies on 7210 SAS-D and SAS-E.
Explains how to configure ingress SAP QoS policy meters, including multipoint meters.
Provides CLI syntax for configuring access egress QoS policies on 7210 SAS-D.
Details commands for displaying access egress QoS policy information.
Defines service egress policies for SLA, queue parameters, and remark policy for 7210 SAS-K.
Provides guidelines for configuring SAP egress policies, including queue mapping and parameters.
Details command hierarchies for configuring and managing service egress policies.
Explains scheduler support and modes, including Strict Priority and WFQ on 7210 SAS-K.
Introduces port scheduler policies for egress ports, controlling traffic behavior and scheduling modes.
Outlines the requirements for a basic QoS port scheduler policy, including unique policy names.
Details command hierarchies for configuring, operating, and showing port scheduler policies.
Explains buffer pool distribution and management for egress buffer pools on 7210 SAS-E/D.
Details the steps to create a new slope QoS policy for 7210 SAS-K devices.
Details command hierarchies for configuring, operating, and showing slope QoS policies.
Explains remark policies for egress of access SAP or access uplink port for 7210 SAS-K.
Outlines requirements for a basic remark policy, including name, type, and FC mapping.
Details command hierarchies for configuring, showing, and operating remark policies.
Lists supported standards like IEEE 802.1ab, 802.1d, 802.1p/Q, 802.1x, and ITU-T Y.1731.
Details supported protocols such as DHCP, Differentiated Services, Multicast, and Network Management.
