Frame Based Accounting
7210 SAS D, E, K OS Quality of Service Guide Page 107
Frame Based Accounting and Accounting and Statistics on 7210 SAS-E and
7210 SAS-D
Accounting records and statistics do not account for frame overhead.
Frame Based Accounting on 7210 SAS-K
On 7210 SAS-K, a configurable CLI command enables accounting of the frame overhead per port.
This command affects the behavior of the ingress queue and egress queue rate of all the SAPs
configured on the port. It is supported on both access port and access-uplink port. When disabled,
the ingress and egress queue rates along with port egress-rate do not account for the Ethernet
frame overhead. When enabled, the ingress and egress queue rates along with port egress-rate
account for the Ethernet frame overhead. By default frame-based accounting is disabled for the
port.
Accounting records and statistics account for frame overhead for SAPs configured on the port
when FBA is enabled on the port.
To Next Page
Loading...
Need help?
General
