Basic Configurations
Page 126 7210 SAS D, E, K OS Quality of Service Guide
dscp-classification <dscp-classification id>
queue <queue id> create
fc <fc-name> create
queue <queue-id>
multicast-queue <queue-id>
[no] use-dei
The following commands associated a network QoS policy with the access-uplink port.
CLI Syntax: config>port
ethernet
access
uplink
qos network-policy-id
CLI Syntax:
config>router
interface interface-name
qos network-policy-id
The following output displays the configuration for uplink port 1/1/1 with network policy 600
applied to the interface.
A:ALA-7>config# info
#--------------------------------------------------
echo "Port Configuration"
#--------------------------------------------------
port 1/1/1
shutdown
description "port 1/1/1"
ethernet
mode access uplink
access
uplink
qos 600
exit
exit
exit
exit
...
#--------------------------------------------------
A:ALA-7>config#
Configuration of DSCP and Dot1p classification policies on 7210 SAS-K
The DSCP and Dot1p classification policies can be configured in the same QoS policy. When
packets are received on a SAP, the following steps are used to determine the FC to assign to the
packet.
To Next Page
Loading...
Need help?
General
