7210 SAS D, E, K OS Quality of Service Guide Page 111
Show Commands
sap-ingress
Syntax sap-ingress [policy-id] [association|match-criteria|detail]
Context show>qos
Description
This command displays accounting status of a sap-ingress policy along with other details of the
policy. When frame-based-accounting is enabled accounting is shown as frame-based otherwise
packet-based.
Parameters policy-id — Displays information about the specific policy ID.
associations — Displays the associations of the sap-ingress policy.
match-criteria — Displays the match criteria of the sap-ingress policy.
detail — Displays the detailed information of the sap-ingress policy.
Sample Output
*A:Dut-1# show qos sap-ingress 1
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (1)
-------------------------------------------------------------------------------
Policy-id : 1 Scope : Template
Default FC : be
Criteria-type : None
Accounting : frame-based
Classifiers Allowed: 16 Meters Allowed : 8
Classifiers Used : 2 Meters Used : 2
Description : Default SAP ingress QoS policy.
===============================================================================
*A:Dut-1#
To Next Page
Loading...
Need help?
General
