Overview
Page 450 7210 SAS D, E, K OS Quality of Service Guide
Configuration Guideline for 7210 SAS-K
• The 7210 SAS-K implements the marking policy only if the node adds ones or two tags or
if it replaces existing one or two tags. It does not touch the VLAN tag which represents
customer payload (for example, 7210 SAS-K does not implement marking for packets
when forwarding traffic out of dot1q range SAP or a NULL SAP).
• On 7210 SAS-K a limited number of unique remark policies are available to be shared
among all the different types of remark policies. In other words, dot1p, dscp and dot1p-
dscp remark policy types share the available resources and scaling one type of remark
policy reduces the amount policies allowed for other type of remark policy.
• On 7210 SAS-K, user also has an option to preserve the Dot1p values in the received
packet. See the CLI description for configure> service> sap> egress> dot1p-inner and
configure> service> sap> egress> dot1p-outer in the 7210 SAS D,E,K Services User
Guide.
To Next Page
Loading...
Need help?
General
