Alcatel-Lucent 7210 SAS Series - Alcatel-Lucent 7210 SAS-Series Services Configuration Process

Alcatel-Lucent 7210 SAS-Series Services Configuration Process
Page 18 7210 SAS D, E, K OS Quality of Service Guide
Alcatel-Lucent 7210 SAS-Series Services Configuration
Process
Table 1 lists the tasks necessary to configure and apply QoS policies. This guide is presented in an
overall logical configuration flow. Each section describes a software area and provides CLI syntax
and command usage to configure parameters for a functional area.
Table 1: Configuration Process
Area Task Chapter
Policy configuration Configuring QoS Policies
• Egress Rate Port Level Egress Rate-Limiting
on page 95
• Accounting Mode Frame Based Accounting on
page 105
• Network Network QoS Policies on page 117
• Network queue Network Queue QoS Policies on
page 187
• SAP ingress Service Ingress QoS Policies on
page 219
• Access egress Access Egress QoS Policies on
7210 SAS-M and 7210 SAS-T on
page 341
• Port scheduler QoS Port Scheduler Policies for
7210 SAS-M and 7210 SAS-T on
page 449
• Slope Slope QoS Policies on page 477
Reference • List of IEEE, IETF, and other
proprietary entities
Standards and Protocol Support on
page 569