CPU Queues
Page 82 7210 SAS D, E, K OS Quality of Service Guide
QoS policies can be applied to the following service types:
• Epipe and VPLS
→ On 7210 SAS-D and 7210 SAS-E, SAP ingress policies are supported on an Epipe
service access point (SAP) and VPLS SAP.
→ On 7210 SAS-K, SAP ingress policies and SAP egress policies are supported on an
Epipe service access point (SAP) and VPLS SAP.
QoS policies can be applied to the following entities:
• Access egress policies on access ports (7210 SAS-D, E only)
• Network QoS policy on access uplink port
• Network queue policy (egress) on access uplink port.
Configuration Notes
The following information describes QoS implementation caveats:
• Creating additional QoS policies is optional.
• Default policies are created for service ingress, service egress, access service egress,
network, network queue, slope, remark, dot1p and DSCP classification and port scheduler.
(the policy types created varies across the platforms)
• Associating a service or access or access uplink with a QoS policy other than the default
policy is optional.
To Next Page
Loading...
