Alcatel-Lucent 7210 SAS Series User Manual

Overview
Page 188 7210 SAS D, E, K OS Quality of Service Guide
Overview
Network Queue policies define the egress network queuing for the traffic egressing on the access
uplink. Network queue policies are used at the Ethernet port and define the bandwidth distribution
for the various FC traffic egressing on the Ethernet port.
Following is the support available with this policy:
• On 7210 SAS-D and 7210 SAS-E, all network-queue policy will contain 8 queues. There
is no way for user to allocate lesser number of queues or change the mapping of FC to
queue. Each of these queues are shared by unicast and multicast traffic.
• On 7210 SAS-K, user can define the number of queues and the mapping of FC to queue
per network-queue policy. Each of these queues are shared by unicast and multicast traffic.

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English