Alcatel-Lucent 7210 SAS Series - Modifying Access Egress Qos Queues

Access Egress QoS Policies
7210 SAS D, E, K OS Quality of Service Guide Page 343
Modifying Access Egress QoS Queues
To modify access egress queue parameters specify the following:
• Queue ID value. 8 Queues are identified and are mapped as defined in Table 31,
Forwarding Class to Queue-ID Map, on page 81.
• Queue parameters. Egress queues support configuration of CIR and PIR rates.
The following displays the access egress QoS policy configuration:
A:card-1>config>qos# info
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
....
access-egress 30 create
remarking
queue 1
rate cir 100 pir 4500
exit
queue 2
exit
queue 3
exit
queue 4
exit
queue 5
exit
queue 6
exit
queue 7
exit
queue 8
exit
exit
----------------------------------------------
A:card-1>config>qos#