Alcatel-Lucent 7210 SAS Series - Default Network Policy Values; Table 34: Network Policy Defaults

Basic Configurations
Page 128 7210 SAS D, E, K OS Quality of Service Guide
Default Network Policy Values
The default network policy access uplink ports is identified as policy-id 1. Default policies cannot
be modified or deleted. The following displays default network policy parameters:
Table 33: Network Policy Defaults
Field Default
description Default network QoS policy.
scope template
ingress
default-action fc be profile out
egress
remarking yes (for 7210 SAS-E), no (for
7210 SAS-D)
fc af:
dot1p-in-profile
3
dot1p-out-profile
2
fc be:
dot1p-in-profile
0
dot1p-out-profile
0
fc ef:
dot1p-in-profile
5
dot1p-out-profile
5
fc h1:
dot1p-in-profile
6
dot1p-out-profile
6
fc h2:
dot1p-in-profile
4
dot1p-out-profile
4
fc l1: