Alcatel-Lucent 7210 SAS Series - Table 35: Default Network Qos Policy Dot1 P to FC Mapping

Network QoS Policies
7210 SAS D, E, K OS Quality of Service Guide Page 129
The following output displays the default configuration for 7210 SAS- E:
*A:ALU-7210>config>qos>network# info detail
----------------------------------------------
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
meter 1 create
mode trtcm
adaptation-rule pir closest pir closest
rate 0 pir max
dot1p-in-profile
3
dot1p-out-profile
2
fc l2:
dot1p-in-profile
1
dot1p-out-profile
1
fc nc:
dot1p-in-profile
7
dot1p-out-profile
7
Table 34: Default Network QoS Policy Dot1p to FC Mapping
Dot1p Value 7210 FC Ingress Profile
0 be Out
1 l2 In
2 af Out
3 af In
4 h2 In
5 ef In
6 h1 In
7 nc In
Table 33: Network Policy Defaults (Continued)
Field Default