Alcatel-Lucent 7210 SAS Series - Basic Configurations on 7210 SAS-E and 7210 SAS-D

Basic Configurations on 7210 SAS-E and 7210 SAS-D
Page 108 7210 SAS D, E, K OS Quality of Service Guide
Basic Configurations on 7210 SAS-E and 7210 SAS-D
To enable frame-based accounting, you must perform the following:
• The frame-based-accounting command is in the *A:Dut-1> config>qos>frame-based-
accounting context.
• The ingress-enable command enables frame-based-accounting for ingress metering.
• The egress-enable command enables frame-based-accounting for egress queue rates,
scheduler and port level egress-rate.
The following displays the frame-based accounting configuration:
*A:Dut-1>config>qos>frame-based-accounting# info detail
----------------------------------------------
no ingress-enable
no egress-enable
----------------------------------------------
*A:Dut-1>config>qos>frame-based-accounting#