Alcatel-Lucent 7210 SAS Series - Enabling and Disabling Frame-Based Accounting on 7210 SAS-E and 7210 SAS-D

Frame Based Accounting
7210 SAS D, E, K OS Quality of Service Guide Page 109
Enabling and Disabling Frame-Based Accounting on 7210 SAS-E
and 7210 SAS-D
To enable frame-based-accounting for ingress, you can simply use the ingress-enable command
and to enable frame-based-accounting on egress use the egress-enable command. To disable
frame-based-accounting for ingress, execute the no ingress-enable command and to disable
frame-based-accounting on egress, execute the no egress-enable command.
CLI Syntax: config>qos>frame-based-accounting
The following output displays the enabling of frame-based-accounting:
*A:Dut-1>config>qos>frame-based-accounting# ingress-enable
*A:Dut-1>config>qos>frame-based-accounting# egress-enable
*A:Dut-1>config>qos>frame-based-accounting# info
----------------------------------------------
ingress-enable
egress-enable
----------------------------------------------
*A:Dut-1>config>qos>frame-based-accounting#
The following output displays the disabling of frame-based-accounting:
*A:Dut-1>config>qos>frame-based-accounting# no ingress-enable
*A:Dut-1>config>qos>frame-based-accounting# no egress-enable
*A:Dut-1>config>qos>frame-based-accounting# info detail
----------------------------------------------
no ingress-enable
no egress-enable
----------------------------------------------
*A:Dut-1>config>qos>frame-based-accounting#