Port Level Egress Rate-Limiting
7210 SAS D, E, K OS Quality of Service Guide Page 97
Effect of Port Level Rate-Limiting on Access Uplink Queue
Functionality
• When an egress-rate sub-rate value is given, the access-uplink queue rates that are
specified using percentages will use the egress-rate value instead of the port bandwidth if
egress rate is lesser than port bandwidth to configure the appropriate queue rates.
Configuration of egress port rate to different values will result in a corresponding dynamic
adjustment of rates for the queues configured on and access-uplink ports.
• When the egress-rate sub-rate value is set, CBS/MBS of the associated network queues
will not change.
To Next Page
Loading...
Need help?
General
