Show Commands
7210 SAS D, E, K OS Quality of Service Guide Page 179
Show Commands
network
Syntax network [policy-id] [detail]
Context show>qos
Description
This command displays network policy information.
Parameters policy-id — Displays information for the specific policy ID.
Default all network policies
Values 1 — 65535
detail — Includes information about ingress and egress Dot1p bit mappings and network policy interface
associations.
Network QoS Policy Output Fields — The following table describes network QoS Policy output
fields.
Table 36: Show QoS Network Output Fields
Label Description
Policy-Id
The ID that uniquely identifies the policy.
Remark
True —
For 7210 E devices, Remarking is enabled for all pack-
ets that egress this router where the network policy is applied.
The remarking is based on the forwarding class to Dot1p bit
mapping defined under the egress node of the network QoS pol-
icy. For 7210 SAS-D devices remarking can be enabled or dis-
abled.
Description
A text string that helps identify the policy’s context in the con-
figuration file.
Forward Class/
FC Name
Specifies the forwarding class name.
Profile
Out —
Specifies the Dot1p marking for the packets which are
out-of-profile, egressing on this queue.
In — Specifies the Dot1p markings for in-profile packets egressing
this queue.
To Next Page
Loading...
Need help?
General
