Network Egress QoS Policy Forwarding Class Commands
Page 178 7210 SAS D, E, K OS Quality of Service Guide
dscp-out-profile
Syntax dscp-out-profile dscp-name
no dscp-out-profile
Context config>qos>network >egress>fc fc-name
Description
This command specifies the out-of-profile DSCP name for the forwarding class. When marking is
set, the corresponding DSCP value is used to mark all IP packets with out-of-profile status, on the
egress of this forwarding class queue.
When multiple DSCP names are associated with the forwarding class at network egress, the last
name entered will overwrite the previous value.
The no form of this command reverts to the factory default out-of-profile dscp-name setting for
policy-id 1.
Parameters dscp-name — System- or user-defined, case-sensitive dscp-name.
Default none
Values Any defined system- or user-defined dscp-name
To Next Page
Loading...
