Alcatel-Lucent 7210 SAS Series - Copying and Overwriting Qos Policies

Service Ingress QoS Policies
7210 SAS D, E, K OS Quality of Service Guide Page 275
Copying and Overwriting QoS Policies
You can copy an existing service ingress policy, rename it with a new policy ID value, or overwrite
an existing policy ID. The overwrite option must be specified or an error occurs if the
destination policy ID exists.
CLI Syntax: config>qos# copy {sap-ingress} source-policy-id dest-policy-id
[overwrite]
*A:ALU-7210>config>qos# info
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
sap-ingress 100 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
sap-ingress 101 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
sap-ingress 200 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
----------------------------------------------
*A:ALU-7210>config>qos#