Alcatel-Lucent 7210 SAS Series - Access Egress Qos Policy Command Reference

7210 SAS D, E, K OS Quality of Service Guide Page 353
Access Egress QoS Policy Command Reference
Command Hierarchies
• Configuration Commands for 7210 SAS-D on page 353
• Configuration Commands for 7210 SAS-E on page 353
• Show Commands on page 356
Configuration Commands for 7210 SAS-D
config
— qos
— access-egress policy-id [create]
— no access-egress policy-id
— description description-string
— no description
— fc fc-name [create]
— no fc fc-name
— [no] de-mark [force de-value]
— dot1p dot1p-priority
— no dot1p
— dot1p-in-profile dot1p-value
— no dot1p-in-profile
— dot1p-out-profile dot1p-value
— no dot1p-out-profile
— dscp-in-profile dscp-name
— no dscp-in-profile
— dscp-out-profile dscp-name
— no dscp-out-profile
— queue queue-id
— adaptation-rule [cir adaptation-rule] [pir adaptation-rule]
— no adaptation-rule
— rate cir cir-rate [pir pir-rate]
— no rate
— [no] remarking {use-dot1p|use-dscp|all}
— scope {exclusive | template}
— no scope
Configuration Commands for 7210 SAS-E
config
— qos
— access-egress policy-id [create]
— no access-egress policy-id