Alcatel-Lucent 7210 SAS Series - Modifying Port Level Egress-Rate Command

Port Level Egress Rate-Limiting
7210 SAS D, E, K OS Quality of Service Guide Page 99
Modifying Port Level Egress-Rate Command
To modify egress-rate parameters you can simply apply a egress-rate command with new egress-
rate and max-burst value.
The following displays the egress-rate configuration for a port for 7210 SAS-D, E:
*A:Dut-1>config>port# ethernet egress-rate 10000 max-burst default
*A:Dut-1>config>port# info
----------------------------------------------
ethernet
egress-rate 10000
exit
no shutdown
----------------------------------------------
*A:Dut-1>config>port#