EasyManua.ls Logo

Alcatel-Lucent 7210 SAS Series - Table 4: Qos Policy Types and Descriptions for 7210 SAS-K

Alcatel-Lucent 7210 SAS Series
488 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
QoS Policies
7210 SAS D, E, K OS Quality of Service Guide Page 27
Table 4: QoS Policy Types and Descriptions for 7210 SAS-K
Policy Type Applied at… Description Page
Service Ingress Access SAP
Ingress
Defines up to 8 forwarding class queues and queue
parameters to define queue characteristics (For example:
scheduler priority and weight, rates, etc.)
For traffic classification, defines match criteria to map
flows to the queues based on Dot1p or IP DSCP criteria.
65
Service Egress Access SAP
Egress
Allocates up to 8 forwarding class queues and maps for-
warding classes to the queues.
Defines FC to remarking values, through the use of
remark policies.
Defines queue parameters to define queue characteristics
(For example: scheduler priority and weight, rates, etc.).
67
Egress Rate Access port and
Access-uplink
port
Configures the maximum bandwidth available for traffic
sent out of a specified port.
79
Network QoS Access-uplink
port
At ingress, defines up to 8 forwarding class queues and
queue parameters to define queue characteristics (For
example: scheduler priority and weight, rates, etc.).
For traffic classification, defines match criteria to map
flows to the queues based on Dot1p and DSCP values.
At egress, defines FC to remarking values, through the
use of remark policies.
34
Network Queue Access-uplink
port
Allocates up to 8 forwarding class queues and maps for-
warding classes to the queues.
• Defines queue parameters to define queue characteristics
(For example: scheduler priority and weight, rates, etc.).
43
Slope policies SAP queues
(both ingress
and egress) and
Access-uplink
port (both
ingress and
egress queues)
Enables or disables the high-slope and low-slope param-
eters for queue.
On 7210 SAS-K, in addition to high-slope and low-
slope, user has an option to use high-slope-ring and low-
slope-ring parameters for access-uplink port egress
queues.
86
Remark Policies SAP egress,
Access-uplink
port egress
Defines FC to remarking values; Not directly associated
with a SAP or a port. Instead it is associated with SAP
egress policy
109

Table of Contents

Related product manuals