Alcatel-Lucent 7210 SAS Series - Applying Network Queue Policies; Ethernet Ports

Network Queue QoS Policies
7210 SAS D, E, K OS Quality of Service Guide Page 191
Applying Network Queue Policies
Apply network queue policies to the following entities:
• Ethernet Ports
Ethernet Ports
Use the following CLI syntax to apply a network queue policy to an Ethernet port.
CLI Syntax: config>port#
ethernet
access
uplink
queue-policy policy-name
#--------------------------------------------------
echo "Port Configuration"
#--------------------------------------------------
port 1/1/1
ethernet
mode access uplink
access
uplink
queue-policy "nq1-cbs"
exit
exit
exit
no shutdown
exit