Service Egress Policies
7210 SAS D, E, K OS Quality of Service Guide Page 391
Basic Configurations
A basic service egress QoS policy must conform to the following:
• Have a unique service egress QoS policy ID.
• Have a QoS policy scope of template or exclusive.
• Have at least one forwarding class queue.
Create a SAP Egress Policy
To create a new SAP Egress policy, define the following:
• A SAP Egress policy name.
• Provide a brief description of the policy features.
• Provide the queue parameters for all the queues
Use the following CLI syntax to configure a SAP Egress policy:
CLI Syntax:
*A:SAH01-051>config>qos# sap-egress
- no sap-egress <policy-id>
- s
ap-e
gress
<pol
icy-
id> [
crea
te]
<policy-id> : [1..65535]|<name:64 char max>
<create> : keyword - mandatory while creating an entry.
[no] description - Description for this sap-egress policy
[no] fc + Configure forwarding-class mappings
[no] queue + Configure a queue
[no] remark - Specify Remarking policy for this policy
[no] remarking - Enable/disable remarking
[no] scope - Specify scope of the policy
*A:SAH01-051>config>qos# info detail
sap-egress 1 create
description "Default SAP egress QoS policy."
scope template
no remarking
remark 1
queue 1 create
adaptation-rule cir closest pir closest
rate cir 0 pir max
mbs 60
To Next Page
Loading...
Need help?
General
