Alcatel-Lucent 7210 SAS Series User Manual

Network Queue QoS Policies
7210 SAS D, E, K OS Quality of Service Guide Page 197
Service Management Tasks
This section discusses the following service management tasks:
• Deleting QoS Policies on page 207
• Copying and Overwriting QoS Policies on page 208
• Editing QoS Policies on page 210
Deleting QoS Policies
A network queue policy is associated by default with all access uplink ports. You can replace the
default policy with a customer-configured policy, but you cannot entirely remove a QoS policy.
When you remove a QoS policy, the policy association reverts to the default network-queue policy
default.
To delete a user-created network queue policy, enter the following commands:
CLI Syntax: config>qos# no network-queue policy-name
Example : config>qos# no network-queue nq1

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English