Alcatel-Lucent 7210 SAS Series User Manual

Network Egress QoS Policy Forwarding Class Commands
Page 180 7210 SAS D, E, K OS Quality of Service Guide
7210 SAS-E
*A:SN12345678# show qos network 1
===============================================================================
QoS Network Policy
===============================================================================
-------------------------------------------------------------------------------
Network Policy (1)
-------------------------------------------------------------------------------
Policy-id : 1 Remark : True
Forward Class : be Profile : Out
Attach Mode : l2 Config Mode : l2
Scope : Template
Description : Default network QoS policy.
-------------------------------------------------------------------------------
Meter Mode CIR Admin CIR Rule PIR Admin PIR Rule CBS MBS
-------------------------------------------------------------------------------
1 TrTcm_CA 0 closest max closest 32 128
9 TrTcm_CA 0 closest max closest 32 128
-------------------------------------------------------------------------------
FC UCastM MCastM
-------------------------------------------------------------------------------
No FC-Map Entries Found.
-------------------------------------------------------------------------------
Port Attachments
-------------------------------------------------------------------------------
Port-id : 1/1/24
===============================================================================
*A:SN12345678#
7210 SAS-D
Accounting
Packet-based — Specifies that the meters associated with
this policy do not account for packet framing overheads (such as
Ethernet the Inter Frame Gap (IFG) and the preamble), while
accounting for the bandwidth to be used by this flow.
Frame-based — Specifies that the meters associated with this
policy account for the packet framing overheads (such as for
Ethernet the IFG and preamble), while accounting the band-
width to be used by the flow.
Dot1p Bit Mapping:
Out-of-Profile
Displays the Dot1p value used for out-of-profile traffic.
In-Profile
Displays the Dot1p value used for in-profile traffic.
Port-Id
Specifies the physical port identifier that associates the interface.
Table 36: Show QoS Network Output Fields (Continued)
Label Description

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English