Alcatel-Lucent 7210 SAS Series User Manual

Basic Configurations
Page 130 7210 SAS D, E, K OS Quality of Service Guide
mbs default
cbs default
exit
meter 9 multipoint create
mode trtcm
adaptation-rule pir closest cir closest
rate 0 pir max
mbs default
cbs default
exit
dot1p 0 fc be profile out
dot1p 1 fc l2 profile in
dot1p 2 fc af profile out
dot1p 3 fc af profile in
dot1p 4 fc h2 profile in
dot1p 5 fc ef profile in
dot1p 6 fc h1 profile in
dot1p 7 fc nc profile in
exit
egress
no remarking
fc af
dot1p-in-profile 3
dot1p-out-profile 2
exit
fc be
dot1p-in-profile 0
dot1p-out-profile 0
exit
fc ef
dot1p-in-profile 5
dot1p-out-profile 5
exit
fc h1
dot1p-in-profile 6
dot1p-out-profile 6
exit
fc h2
dot1p-in-profile 4
dot1p-out-profile 4
exit
fc l1
dot1p-in-profile 3
dot1p-out-profile 2
exit
fc l2
dot1p-in-profile 1
dot1p-out-profile 1
exit
fc nc
dot1p-in-profile 7
dot1p-out-profile 7
exit
exit
----------------------------------------------
*A:ALU-7210>config>qos>network#
The following output displays the default configuration for 7210 SAS- E:

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English