Show Commands
Page 112 7210 SAS D, E, K OS Quality of Service Guide
network
Syntax network [policy-id] [detail]
Context show>qos
Description
This command displays the accounting status of a network qos policy along with other details of
the policy. When frame-based-accounting is enabled accounting is shown as frame-based
otherwise packet-based.
Parameters policy-id — Displays information about the specific policy ID.
detail — Displays the detail policy information.
Sample Output
*A:Dut-1# show qos network 1
===============================================================================
QoS Network Policy
===============================================================================
-------------------------------------------------------------------------------
Network Policy (1)
-------------------------------------------------------------------------------
Policy-id : 1 Remark : False
Forward Class : be Profile : Out
Attach Mode : l2 Config Mode : l2+mpls
Scope : Template Policy Type : port
Accounting : frame-based
Description : Default network-port QoS policy.
-------------------------------------------------------------------------------
Meter Mode CIR Admin CIR Rule PIR Admin PIR Rule CBS MBS
-------------------------------------------------------------------------------
1 TrTcm_CA 0 closest max closest 32 128
-------------------------------------------------------------------------------
FC UCastM MCastM
-------------------------------------------------------------------------------
No FC-Map Entries Found.
-------------------------------------------------------------------------------
Port Attachments
-------------------------------------------------------------------------------
Port-id : 1/1/3
Port-id : 1/1/6
Port-id : 1/1/7
Port-id : 1/1/8
Port-id : 1/1/9
Port-id : 1/1/10
Port-id : 1/1/11
Port-id : 1/1/12
Port-id : 1/1/13
Port-id : 1/1/14
Port-id : 1/1/15
Port-id : 1/1/16
Port-id : 1/1/17
Port-id : 1/1/18
Port-id : 1/1/19
Port-id : 1/1/20
To Next Page
Loading...
Need help?
General
