Alcatel-Lucent 7210 SAS Series - Slope QoS Policy Command Reference

7210 SAS D, E, K OS Quality of Service Guide Page 495
Slope QoS Policy Command Reference
Command Hierarchies
• Configuration Commands (for 7210 SAS-E devices) on page 495
• Configuration Commands (for 7210 SAS-D devices) on page 495
• Configuration commands for 7210 SAS-K device on page 496
• WRED Commands (supported only on 7210 SAS-D) on page 498
• Operational Commands on page 498
• Show Commands on page 498
Configuration Commands(for 7210 SAS-E devices)
config
— qos
— [no] slope-policy name [create]
— description description-string
— no description
— [no] high-slope
— start-threshold threshold
— no start-threshold
— queue queue drop-rate drop-rate
— no queue queue
— [no] shutdown
— [no] low-slope
— start-threshold threshold
— no start-threshold
— queue queue drop-rate drop-rate
— no queue queue
— [no] shutdown
Configuration Commands (for 7210 SAS-D devices)
config
— qos
— [no] slope-policy name
— description description-string
— no description
— queue queue-id
— [no] high-slope
— max-avg percent
— no max-avg
— max-prob percent
— no max-prob