Operational Commands
7210 SAS D, E, K OS Quality of Service Guide Page 499
Slope Policy QoS Commands
slope-policy
Syntax [no] slope-policy name [create]
Context config>qos
Description
This command enables the context to configure a QoS slope policy.
Default slope-policy “default”
Parameters name — The name of the slope policy.
Values Valid names consist of any string up to 32 characters long composed of printable, 7-bit
ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.
To Next Page
Loading...
