Alcatel-Lucent 7210 SAS M - MPLS LSP Commands

MPLS/RSVP Command Reference
Page 104 7210 SAS M, T, X, R6, Mxp MPLS Configura-
tion Guide
MPLS LSP Commands
config
—router
— [no] mpls
— [no] lsp lsp-name [bypass-only | mpls-tp src-tunnel-num]
— [no] adaptive
— [no] adspec
— bgp-transport-tunnel include | exclude
— [no] cspf [use-te-metric]
— [no] exclude group-name [group-name...(up to 5 max)]
— fast-reroute frr-method
—no fast-reroute
— bandwidth rate-in-mbps
—no bandwidth
— hop-limit number
—no hop-limit
— [no] node-protect
— from ip-address
— hop-limit number
—no hop-limit
— [no] include group-name [group-name...(up to 5 max)]
— [no] ldp-over-rsvp
[include | exclude]
— metric metric
— [no] primary path-name
— [no] adaptive
— bandwidth rate-in-mpbs
—no bandwidth
— [no] exclude group-name [group-name...(up to 5 max)]
— hop-limit number
—no hop-limit
— [no] include group-name [group-name...(up to 5 max)]
— [no] record
— [no] record-label
— [no] shutdown
— retry-limit number
—no retry-limit
— retry-timer seconds
—no retry-timer
— rsvp-resv-style [se | ff]
— [no] secondary path-name
— [no] adaptive
— bandwidth rate-in-mbps
—no bandwidth
— [no] exclude group-name [group-name...(up to 5 max)]
— hop-limit number
—no hop-limit
— [no] include group-name [group-name...(up to 5 max)]
—[no] path-preference
— [no] record
— [no] record-label
— [no] shutdown