MPLS and RSVP
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide Page 79
Configuring MPLS and RSVP with CLI
This section provides information to configure MPLS and RSVP using the command line
interface.
Topics in this section include:
• MPLS Configuration Overview on page 80
→ LSPs on page 80
→ Paths on page 80
→ Router Interface on page 81
→ Choosing the Signaling Protocol on page 81
• Basic MPLS Configuration on page 82
• Common Configuration Tasks on page 83
→ Configuring MPLS Components on page 84
→ Configuring Global MPLS Parameters on page 84
→ Configuring an MPLS Interface on page 85
→ Configuring MPLS Paths on page 86
→ Configuring an MPLS LSP on page 87
• Configuring RSVP Parameters on page 91
→ Configuring RSVP Message Pacing Parameters on page 92
• MPLS Configuration Management Tasks on page 94
• RSVP Configuration Management Tasks on page 99
To Next Page
Loading...
