Alcatel-Lucent 7210 SAS M - Modifying MPLS Static LSP Parameters

MPLS and RSVP
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide Page 97
Modifying MPLS Static LSP Parameters
In order to modify static LSP parameters, the config>router>mpls>path context must be shut
down first.
The following displays a static LSP configuration example. Refer to the static LSP
configuration on page 88.
A:ALA-1>config>router>mpls# info
----------------------------------------------
...
static-lsp "static-LSP"
to 10.10.10.234
push 102704 nexthop 10.10.8.114
no shutdown
exit
no shutdown
----------------------------------------------
A:ALA-1>config>router>mpls#