Alcatel-Lucent 7210 SAS M - MPLS Configuration Management Tasks; Modifying MPLS Parameters

MPLS Configuration Management Tasks
Page 94 7210 SAS M, T, X, R6, Mxp MPLS Configura-
tion Guide
MPLS Configuration Management Tasks
This section discusses the following MPLS configuration management tasks:
• Modifying MPLS Parameters on page 94
• Modifying MPLS Path Parameters on page 96
• Modifying MPLS Static LSP Parameters on page 97
• Deleting an MPLS Interface on page 98
Modifying MPLS Parameters
NOTE: You must shut down MPLS entities in order to modify parameters. Re-enable (no
shutdown) the entity for the change to take effect.