System Management
7450 ESS OS Basic System Configuration Guide Page 323
force — Forces an upgrade from mode a to mode b or d, or an upgrade from mode b to mode d.
clli-code
Syntax clli-code clli-code
no clli-code
Context config>system
Description This command creates a Common Language Location Identifier (CLLI) code string for the 7450 ESS-Series
router. A CLLI code is an 11-character standardized geographic identifier that uniquely identifies
geographic locations and certain functional categories of equipment unique to the telecommunications
industry.
No CLLI validity checks other than truncating or padding the string to eleven characters are performed.
Only one CLLI code can be configured, if multiple CLLI codes are configured the last one entered
overwrites the previous entry.
The no form of the command removes the CLLI code.
Default none — No CLLI codes are configured.
Parameters clli-code — The 11 character string CLLI code. Any printable, seven bit ASCII characters can be used
within the string. If the string contains special characters (#, $, spaces, etc.), the entire string must be
enclosed within double quotes. If more than 11 characters are entered, the string is truncated. If less than
11 characters are entered the string is padded with spaces.
To Next Page
Loading...
