System Management
7450 ESS OS Basic System Configuration Guide Page 329
switchover-exec
Syntax switchover-exec file-url
no switchover-exec
Context config>system
Description This command specifies the location and name of the CLI script file executed following a redundancy
switchover from the previously active CPM card. A switchover can happen because of a fatal failure or by
manual action.
The CLI script file can contain commands for environment settings, debug (excluding mirroring settings),
and other commands not maintained by the configuration redundancy.
The following commands are not supported in the switchover-exec file: clear, configure, candidate, oam,
tools, oam, ping, traceroute, mstat, mtrace and mrinfo.
When the file-url parameter is not specified, no CLI script file is executed.
Default none
Parameters file-url — Specifies the location and name of the CLI script file.
Values file url: local-url | remote-url: 255 chars max
local-url: [cflash-id/][file-path]
remote-url: [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id: cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
To Next Page
Loading...
