Page 384 7450 ESS OS Basic System Configuration Guide
radius-discovery
Syntax radius-discovery
Context admin
Description This command performs RADIUS discovery operations.
force-discover
Syntax force-discover [svc-id service-id]
Context admin>radius-discovery
Description When enabled, the server is immediately contacted to attempt discovery.
Parameters svc-id service-id — Specifies an existing service ID.
Values 1 — 2147483648 | svc-name, up to 64 char max
tech-support
Syntax tech-support file-url
Context admin
Description This command creates a system core dump.
NOTE: This command should only be used with authorized direction from the Alcatel-Lucent Technical
Assistance Center (TAC).
file-url — The file URL location to save the binary file.
file url: local-url | remote-url: 255 chars max
local-url: [cflash-id/][file-path], 200 chars max, including the cflash-id
directory length, 99 chars max each
remote-url: [{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [ hostname | ipv4-address | [ipv6- address] ]
ipv4-address a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
255 chars max, directory length 99 chars max each
cflash-id: cf1:, cf1-A:,cf1-B:,cf2:,cf2-A:,cf2-B:,cf3:,cf3-A:,cf3-B:
To Next Page
Loading...
