EasyManua.ls Logo

Alcatel-Lucent 7450 ESS-12 - Page 443

Alcatel-Lucent 7450 ESS-12
537 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 414 7450 ESS OS Basic System Configuration Guide
src-mac
Syntax src-mac ieee-address
no src-mac
Context config>redundancy>mc>peer>mcr>node>cv
Description This command specifies the source MAC address used for the Ring-Node Connectivity Verification of this
ring node.
A value of all zeroes (000000000000 H (0:0:0:0:0:0)) specifies that the MAC address of the system
management processor (CPM) is used.
Default no src-mac
Parameters ieee-address — Specifies the source MAC address.
vlan
Syntax vlan [0..4094]
no vlan
Context config>redundancy>mc>peer>mcr>node>cv
Description This command specifies the VLAN tag of the SAP used for the ring-node connectivity verification of this
ring node. It is only meaningful if the value of service ID is not zero. A zero value means that no VLAN tag
is configured.
Default no vlan
Parameters [0..4094] — Specifies the set of VLAN IDs associated with the SAPs that are to be controlled by the slave
peer.

Table of Contents

Related product manuals