EasyManua.ls Logo

Alcatel-Lucent 7450 ESS-12 - Page 474

Alcatel-Lucent 7450 ESS-12
537 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 436 7450 ESS OS Basic System Configuration Guide
--------------------------------------------------------------------------------
No. of Rollback Files: 10
================================================================================
ptp
Syntax ptp [peer ip-address [detail] | peers [detail] | unicast | statistics | standby]
Context show>system
Description This command displays Precision Time Protocol (PTP) configuration and state.
Output Show PTP Output — The following table describes PTP output fields.
Sample Output
B:NS082761964# show system ptp
===============================================================================
IEEE 1588/PTP Clock Information
===============================================================================
-------------------------------------------------------------------------------
Local Clock
-------------------------------------------------------------------------------
Clock Type : boundary PTP Profile : ieee1588-2008
Domain : 0
Admin State : up Oper State : up
Rx Announce Rate : 1 pkt/2 s Wait To Restore : disabled
Clock Id : 001af0fffeb2fead Clock Class : 255 (slave-only)
Clock Accuracy : 0xfe (unknown) Clock Variance : ffff (not computed)
Clock Priority1 : 128 Clock Priority2 : 128
PTP Recovery State: locked Last Changed : 08/24/2010 13:17:37
Frequency Offset : +231.920 ppb
-------------------------------------------------------------------------------
Parent Clock
-------------------------------------------------------------------------------
Table 27: Show System PTP Output Fields
Label Description
Pending
When the SR/ESS has initiated a request to a peer but has not yet
received a response.
Granted
When the SR/ESS has initiated a request to a peer and it was granted
OR a peer has made a request of the SR/ESS and it was granted.
Denied
When the SR/ESS has initiated a request to a peer but it was rejected.
Canceled
When a cancel message has been received from or transmitted toward
a peer.
Expired
When a unicast session between the SR/ESS and the peer has expired
without being renewed.

Table of Contents

Related product manuals